RAL1006 maize yellow Pure Polyester Powder Coating Rich in
Antioxidants for Aluminum
Powder coatings are mixed with a certain proportion of the resin,
fillers, curing agents and other additives, then prepared by hot
extrusion ,crushed and sieved.The products are stable at room
temperature storage, then baking heat melted and solidified to form
a smooth and bright permanent coating to achieve the purpose of
decoration and corrosion.
1). Non-toxic, solvent-free and non-toxic volatile substances, no
intoxication, no fire, no "three wastes"
2). Raw material utilization is high, the highest utilization rate
even more than 99%.
3) .Easy to automate operation, high production efficiency, reduce
costs.
4). Good impact strength and toughness, high coverage corners to
chemical corrosion and electrical insulation properties.
5). Powder coatings storage and transport are safety and
convenience.
Application
Suitable for all kinds of products such as household appliances,
instruments, meters medical devices,
automotive components, metal furniture, fitness equipment, indoor
decorative painting, etc.
Also apply to a variety of equipment, pipes, pipe fittings and
other requirements of corrosion coating.
| Test items | Inspection standards | Test indicators |
| High light | Glazed/Matte/Low light |
| Impact resistance | ISO6272 | GB/T1732-1993 | 50kg/cm | 40kg/cm |
| Cupping test | ISO1520 | GB/T9753-1988 | 8mm | 7mm |
| The adhesion (grid method) | ISO2409 | GB/T9286-1998 | 0 |
| Bending | ISO1519 | GB/T6742-1986 | 2mm | 3mm |
| Pencil Hardness | ASTMD3363 | GB/T6739-1996 | 1H-2H |
| Salt spray test | ISO7253 | GB/T1771-1991 | >500 hours |
| Damp heat test | ISO6270 | GB/T1740-1979 | >1000 hours |
| Heat resistance | 110°C/24 hours(white) | Good gloss retention,E≤0.3-0.4 |
| Florida weathering exposure | ISO2810 | South 45 °,12mons | Gloss retention≥50% |
FAQ
Q1. Can I have a sample order for powder coating?
A: Yes, we welcome sample order to test and check quality. Mixed
samples are acceptable.
Q2. What about the lead time?
A: Sample needs 3-5 days, mass production time needs 7 days for
inspection and customs declaration.
Q3. Do you have any MOQ limit for powder coating?
A: Low MOQ, 1-2kg sample powder checking is available.
Q4. How to proceed an order for powder coating?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our
suggestions.
Thirdly customer confirms the samples and places deposit for formal
order.
Fourthly We arrange the production.
Q5: Do you offer guarantee for the products?
A: Yes, we offer professional after-sale service for every
customer.
